Please refer to the latest version of the user manual which is ready for download under www.thomann.de. Hero Spot Wash 140 2in1 RGBW+W Hero Spot Wash 140 WH 2in1 moving head...
Personal consultation For personal consultation please contact our technical hotline. If you have any problems with the device the customer service will Service gladly assist you. Hero Spot Wash 140 2in1 RGBW+W Hero Spot Wash 140 WH 2in1 moving head...
In the electronic version of the manual, you can click the cross-reference to jump to the specified location. Example: See Ä ‘Cross-references’ on page 8. Hero Spot Wash 140 2in1 RGBW+W Hero Spot Wash 140 WH 2in1 moving head...
This combination of symbol and signal word indicates a pos‐ sible dangerous situation that can result in material and environmental damage if it is not avoided. Hero Spot Wash 140 2in1 RGBW+W Hero Spot Wash 140 WH 2in1 moving head...
Page 10
General information Warning signs Type of danger Warning – high-voltage. Warning – dangerous optical radiation. Warning – suspended load. Warning – danger zone. Hero Spot Wash 140 2in1 RGBW+W Hero Spot Wash 140 WH 2in1 moving head...
Extend the operating life of the device by regular breaks and by avoiding frequent switching on and off. The device is not suitable for continuous operation. Hero Spot Wash 140 2in1 RGBW+W Hero Spot Wash 140 WH 2in1 moving head...
Page 12
Within the device there are areas where high voltages may be present. Never remove any covers. There are no user-serviceable parts inside. Do not use the device if covers, protectors or optical components are missing or damaged. Hero Spot Wash 140 2in1 RGBW+W Hero Spot Wash 140 WH 2in1 moving head...
Page 13
Never look directly into the light source. WARNING! Risk of epileptic shock Strobe lighting can trigger seizures in photosensitive epilepsy. Sensitive persons should avoid looking at strobe lights. Hero Spot Wash 140 2in1 RGBW+W Hero Spot Wash 140 WH 2in1 moving head...
Page 14
The load capacity of trusses or other fixtures must be sufficient for the intended number of devices. Not that the movement of the head places additional loads on the load-bearing parts. Hero Spot Wash 140 2in1 RGBW+W Hero Spot Wash 140 WH 2in1 moving head...
Page 15
Risk of fire Do not block areas of ventilation. Do not install the device near any direct heat source. Keep the device away from naked flames. Hero Spot Wash 140 2in1 RGBW+W Hero Spot Wash 140 WH 2in1 moving head...
Page 16
(dust, smoke, nicotine, fog, etc.), the unit should be maintained by qualified service personnel at regular intervals to prevent overheating and other malfunction. The device must not be moved during use. Hero Spot Wash 140 2in1 RGBW+W Hero Spot Wash 140 WH 2in1 moving head...
Page 17
In case of doubt, do not put the rubber feet directly on the floor, but use felt-pad floor protectors or a carpet. Hero Spot Wash 140 2in1 RGBW+W Hero Spot Wash 140 WH 2in1 moving head...
Page 18
Possible damage due to installation of a wrong fuse The use of different types of fuses can cause serious damage to the unit. Fire hazard! Only fuses of the same type may be used. Hero Spot Wash 140 2in1 RGBW+W Hero Spot Wash 140 WH 2in1 moving head...
Page 19
Connect just so many devices to the output socket that the maximum current consumption is not exceeded. Ensure the correct dimensioning (wire cross section) of the used power cords of all serially connected devices. Hero Spot Wash 140 2in1 RGBW+W Hero Spot Wash 140 WH 2in1 moving head...
Page 21
You can extend the service life of the illuminants by providing adequate ventilation and operating the LEDs with the lowest possible brightness. Hero Spot Wash 140 2in1 RGBW+W Hero Spot Wash 140 WH 2in1 moving head...
Work from a stable platform whenever you install or move the device or when you perform any kind of maintenance. Block access under the work area. Hero Spot Wash 140 2in1 RGBW+W Hero Spot Wash 140 WH 2in1 moving head...
Page 23
The load capacity of trusses or other fixtures must be sufficient for the intended number of devices. Not that the movement of the head places additional loads on the load-bearing parts. Hero Spot Wash 140 2in1 RGBW+W Hero Spot Wash 140 WH 2in1 moving head...
Page 24
The distance between light output and the illuminated surface must be more than 1.5 m (19.7in). Provide sufficient ventilation. The ambient temperature must always be below 40 °C (104 °F). Hero Spot Wash 140 2in1 RGBW+W Hero Spot Wash 140 WH 2in1 moving head...
Page 25
For error-free operation make use of dedicated DMX cables and do not use ordi‐ nary microphone cables. Never connect the DMX input or output to audio devices such as mixers or ampli‐ fiers. Hero Spot Wash 140 2in1 RGBW+W Hero Spot Wash 140 WH 2in1 moving head...
Page 26
There, you can fasten adapters such as half couplers, trigger clamps, c- hooks etc. Safety cables are being threaded through the eyelet (B) on the bottom side of the housing. Hero Spot Wash 140 2in1 RGBW+W Hero Spot Wash 140 WH 2in1 moving head...
Page 27
Installation Please note that this device must not be connected to a dimmer. Hero Spot Wash 140 2in1 RGBW+W Hero Spot Wash 140 WH 2in1 moving head...
Page 28
When shipping, the battery is already installed in the remote and protected against discharge by a transparent plastic foil. Remove the plastic foil prior to first use. Hero Spot Wash 140 2in1 RGBW+W Hero Spot Wash 140 WH 2in1 moving head...
Create all connections while the device is off. Use the shortest possible high-quality cables for all connections. Take care when running the cables to prevent tripping hazards. Hero Spot Wash 140 2in1 RGBW+W Hero Spot Wash 140 WH 2in1 moving head...
Page 30
Always ensure that the output of the last DMX device in the daisy chain is terminated with a resistor (110 Ω, ¼ W). Hero Spot Wash 140 2in1 RGBW+W Hero Spot Wash 140 WH 2in1 moving head...
Page 31
DMX input of the first slave device. Then connect the DMX output of the first slave device to the DMX input of the second slave device and so on. Hero Spot Wash 140 2in1 RGBW+W Hero Spot Wash 140 WH 2in1 moving head...
Connections and controls Connections and controls Hero Spot Wash 140 2in1 RGBW+W Hero Spot Wash 140 WH 2in1 moving head...
Page 33
6 [UP] Increases the displayed value by one. 7 [ENTER] Selects an option of the respective operating mode, confirms the set value. 8 [DMX IN] DMX input Hero Spot Wash 140 2in1 RGBW+W Hero Spot Wash 140 WH 2in1 moving head...
Page 34
Lockable input socket (Power Twist) for mains power supply 11 [Power out] Lockable output socket (Power Twist) for the power supply of further units. Output current max. 16 A 12 Fuse holder Hero Spot Wash 140 2in1 RGBW+W Hero Spot Wash 140 WH 2in1 moving head...
Page 35
Connections and controls IR remote control (item no. 483679) Hero Spot Wash 140 2in1 RGBW+W Hero Spot Wash 140 WH 2in1 moving head...
Page 36
Dims the overall intensity of the spot LED in eight steps. 9 Manual colour mixing of the wash LEDs in four steps per colour [RED] [GREEN] Green [BLUE] Blue Hero Spot Wash 140 2in1 RGBW+W Hero Spot Wash 140 WH 2in1 moving head...
Page 37
14 [AUTO] Activates the selection of automatic programmes. 15 [SOUND] Activates the sound-control. 16 [PSTN] Activates the manual static position adjustment. Hero Spot Wash 140 2in1 RGBW+W Hero Spot Wash 140 WH 2in1 moving head...
Page 38
Connections and controls Button Function 17 [Gobo Rotate] Adjusts the gobo wheel rotation. 18 [Prism] Turns the prism on and off. Hero Spot Wash 140 2in1 RGBW+W Hero Spot Wash 140 WH 2in1 moving head...
(pan) and inclination (tilt). After a few more seconds, the display shows ‘001’ .The device is now ready for operation. Hero Spot Wash 140 2in1 RGBW+W Hero Spot Wash 140 WH 2in1 moving head...
When the display shows the desired value confirm the setting with [ENTER]. To exit the menu item without making changes, press [MENU]. Make sure that this number matches the configuration of your DMX controller. Hero Spot Wash 140 2in1 RGBW+W Hero Spot Wash 140 WH 2in1 moving head...
Page 41
Ch’ , ‘DMX 16 CH’ or ‘DMX 23 Ch’ ). When the display shows the desired value confirm the setting with [ENTER]. To exit the menu item without making changes, press [MENU]. Hero Spot Wash 140 2in1 RGBW+W Hero Spot Wash 140 WH 2in1 moving head...
Page 42
‘Slave’ Slave function In this mode, the device follows exactly the operation of the master that it is connected to. Hero Spot Wash 140 2in1 RGBW+W Hero Spot Wash 140 WH 2in1 moving head...
Page 43
When the display shows the desired value confirm the setting with [ENTER]. The device plays the selected show as an endless loop. To exit the menu item without making changes, press [MENU]. Hero Spot Wash 140 2in1 RGBW+W Hero Spot Wash 140 WH 2in1 moving head...
Page 44
‘Display Rev’ Display inversion Use [UP] or [DOWN] to select ‘YES’ (text in the display appears upside down) or ‘NO’ (text in the display appears normal). Hero Spot Wash 140 2in1 RGBW+W Hero Spot Wash 140 WH 2in1 moving head...
Page 45
‘Reset Motor’ Resetting the motor When the display shows the desired value confirm the setting with [ENTER]. To exit the menu item without making changes, press [MENU]. Hero Spot Wash 140 2in1 RGBW+W Hero Spot Wash 140 WH 2in1 moving head...
Page 46
Sets the home position of the inclination movement. ‘Red ’ Sets the initial intensity for red. ‘Green’ Sets the initial intensity for green. ‘Blue’ Sets the initial intensity for blue. Hero Spot Wash 140 2in1 RGBW+W Hero Spot Wash 140 WH 2in1 moving head...
Page 47
0 … 255 for red, green, blue, white, light bundling, spot colour and gobo) and confirm the set‐ ting with [ENTER]. To exit the menu item without making changes, press [MENU]. Hero Spot Wash 140 2in1 RGBW+W Hero Spot Wash 140 WH 2in1 moving head...
Page 48
Press [ENTER] to activate the main menu and use [UP] or [DOWN] until the display shows ‘System Info’ . Confirm the selection with [ENTER]. The display shows the current software version, the current operating mode and the DMX start address. Hero Spot Wash 140 2in1 RGBW+W Hero Spot Wash 140 WH 2in1 moving head...
Spot: Stroboscope open 0…255 Focus 0…255 Wash: Dimmer intensity from dark (0) to bright (255) 0…9 Wash: Stroboscope open 10…250 Wash: Stroboscope, increasing speed 251…255 Wash: Stroboscope open Hero Spot Wash 140 2in1 RGBW+W Hero Spot Wash 140 WH 2in1 moving head...
Page 51
31…40 Blue 41…50 White 51…60 Red, white 61…70 Green, white 71…80 Blue, white 81…90 Red, green 91…100 Green, blue 101…110 Red, blue 111…120 Red, green, white Hero Spot Wash 140 2in1 RGBW+W Hero Spot Wash 140 WH 2in1 moving head...
Page 53
Preprogrammed automatic show 6 71…80 Preprogrammed automatic show 7 81…90 Preprogrammed automatic show 8 91…230 Sound control, from sound control off to high microphone sensitivity 231…255 No function Hero Spot Wash 140 2in1 RGBW+W Hero Spot Wash 140 WH 2in1 moving head...
Inclination (tilt) (0° up to the maximum value of the Tilt area. middle position: 128) 0…255 Spot: Dimmer intensity from dark (0) to bright (255) 0…9 Spot: Stroboscope open 10…250 Spot: Stroboscope, increasing speed Hero Spot Wash 140 2in1 RGBW+W Hero Spot Wash 140 WH 2in1 moving head...
Page 55
White, red 14…22 23…31 Red, orange 32…40 Orange 41…49 Orange, green 50…58 Green 59…67 Green, blue 68…76 Blue 77…85 Blue, yellow 86…94 Yellow 95…103 Yellow, light blue Hero Spot Wash 140 2in1 RGBW+W Hero Spot Wash 140 WH 2in1 moving head...
Page 66
Focus 0…7 White (open) 8…130 Prism 131…255 Prism: Clockwise rotation, speed increasing 0…255 Wash: Dimmer intensity from dark (0) to bright (255) 0…9 Wash: Stroboscope open Hero Spot Wash 140 2in1 RGBW+W Hero Spot Wash 140 WH 2in1 moving head...
Page 67
Intensity blue (0 % to 100 %) 0…250 Intensity white (0 % to 100 %) 0…250 Colour temperature 0…10 No function 11…20 21…30 Green 31…40 Blue 41…50 White 51…60 Red, white Hero Spot Wash 140 2in1 RGBW+W Hero Spot Wash 140 WH 2in1 moving head...
Page 69
Automatic colour sequence, gobo (sound control, from sound control to high microphone sensitivity) 0…10 No function 11…20 preprogrammed automatic show 1 21…30 Preprogrammed automatic show 2 31…40 Preprogrammed automatic show 3 41…50 Preprogrammed automatic show 4 Hero Spot Wash 140 2in1 RGBW+W Hero Spot Wash 140 WH 2in1 moving head...
Page 70
Preprogrammed automatic show 7 81…90 Preprogrammed automatic show 8 91…230 Sound control, from sound control off to high microphone sensitivity 231…240 Reset after 3 seconds 241…255 No function Hero Spot Wash 140 2in1 RGBW+W Hero Spot Wash 140 WH 2in1 moving head...
Never connect the DMX input or output to audio devices such as mixers or ampli‐ fiers. In the following we list a few common problems that may occur during operation. We give you some suggestions for easy troubleshooting: Hero Spot Wash 140 2in1 RGBW+W Hero Spot Wash 140 WH 2in1 moving head...
Page 79
DMX interface circuit. If the procedures recommended above do not succeed, please contact our Service Center. You can find the contact information at www.thomann.de. Hero Spot Wash 140 2in1 RGBW+W Hero Spot Wash 140 WH 2in1 moving head...
Before cleaning, switch off the device and disconnect mains-operated devices from the mains. Only use pH-neutral, solvent-free and non-abrasive cleaning agents. Clean the unit with a slightly damp lint-free cloth. Hero Spot Wash 140 2in1 RGBW+W Hero Spot Wash 140 WH 2in1 moving head...
To protect the environment, dispose of empty batteries at your retail store or at appropriate collection sites. Hero Spot Wash 140 2in1 RGBW+W Hero Spot Wash 140 WH 2in1 moving head...
Page 82
Dispose this device through an approved waste disposal firm or through your local waste facility. When discarding the device, comply with the rules and regulations that apply in your country. If in doubt, consult your local waste disposal facility. Hero Spot Wash 140 2in1 RGBW+W Hero Spot Wash 140 WH 2in1 moving head...