Table of contents Safety instructions ..........................3 1.1. For safe and efficient operation ....................3 Designated use ..........................4 Introduction ............................5 Control .............................. 5 Technical data ..........................6 2 / 8...
1. Safety instructions • This device is device is suitable for indoor use (not outdoors) only. • All modifications to the device will void the warranty. All modifications to the device will void the warranty. • Repairs are to carry out by skilled personnel only. Repairs are to carry out by skilled personnel only.
2. Designated use The device is only approved for a connection up to 230V 50/60 Hz AC voltage and only for indoor use. Regular breaks during operation increase the lifetime of your device. Avoid convulsions or any form of forceful impact during the installation or the start-up of the device. Make sure that the device is not exposed excessive heat, humidity or dust at the place of installation.
3. Introduction Thank you for buying the LED Miniflash RGB. 4. Control You can operate the device in two modes: 1. Automatic mode 2. Sound-to-light With the help of the red switch on the top of the device you can choose between the automatic mode and sound-to-light mode.
5. Technical data Power supply Voltage 110-240V / 50-60Hz Power consumption max. 18 W Light source Lm type L’ED single color Color spectrum Power 12 W Number / Power 12 x 1 W (4x red, 4x green, 4x blue) Connections Strom in Euro plug Hardware...