Setting The Sensitivity Of Station Seek Tuning; Storing Stations; Storing Stations Automatically (Travelstore); Listening To Stored Stations - Blaupunkt ALICANTE MP36 Operating Instructions Manual

Radio mode
Setting the sensitivity of station
seek tuning
You can choose whether the radio should
only tune into stations providing good re-
ception or whether it can also tune into
those with a weak reception.

Press the MENU button 9.

Press the or button : repeatedly
until "SENS" appears on the display.
The display shows the currently set sensitiv-
ity level. "SENS HI3" means that the tuner is
set to the highest sensitivity setting. "SENS
LO1" means it is set to the lowest sensitiv-
ity setting.

Set the desired sensitivity level using
the or button :.
When you have finished making your chang-
es,

press the MENU button 9.
Note:
You can set different sensitivity levels
for FM and MW or LW (AM).

Storing stations

Storing stations manually

Select the desired memory bank (FM1,
FM2, FMT) or one of the wavebands
(MW or LW).

Tune into the desired station.

Press and hold down one of the station
buttons 1 - 6 for longer than two sec-
onds to assign the station to that but-
ton.
46
Storing stations automatically
(Travelstore)
You can automatically store the six stations
offering the strongest reception in the re-
gion (FM only). The stations are stored in
the FMT memory bank.
Note:
Any stations that were previously
stored in this memory bank are deleted
in the process.
 Press and hold down the BND•TS but-
ton 6 for longer than two seconds.
The storing procedure begins. "FM TSTORE"
appears on the display. After the process
has completed, the radio will play the sta-
tion that is stored in memory location 1 of
the FMT memory bank.

Listening to stored stations


Select the memory bank or waveband.

Press one of the station buttons 1 - 6
;.
The stored station is played if it can be re-
ceived.
Scanning receivable stations
(SCAN)
You can use the scan function to play all the
receivable stations briefly. You can set the
scanning time in the menu to between 5
and 30 seconds.
Starting SCAN

Press and hold down the MENU button
9 for longer than two seconds.
Scanning begins.