Draytek Vigor 2765 Series Quick Start Manual page 10

Interface Description
Factory Reset Restore the default settings.
Usage: Turn on the router (ACT LED is blinking). Press the hole and
keep for more than 5 seconds. When you see the ACT LED begins to
blink rapidly than usual, release the button. Then the router will
restart with the factory default configuration.
USB1~USB2 Connector for a USB device (for 3G/4G USB Modem or printer).
P1~P4 Connectors for local networked devices.
DSL
Connector for accessing the Internet.
I / O
Power Switch.
PWR Connector for a power adapter.
4