Turning Off Both Trc And Vsc Systems; Operating Conditions Of Hill-Start Assist Control - Toyota VIOS Owner's Manual

Table of Contents

Advertisement

298
4-5. Using the driving support systems

Turning off both TRC and VSC systems

To turn the TRC and VSC systems off, press and hold
seconds while the vehicle is stopped.
Vehicles with a drive monitor display:
The "TRC OFF" indicator light and the VSC OFF indicator light will come on.
Vehicles with a multi-information display:
The VSC OFF indicator light will come on and the "Traction Control Turned
Off" will be shown on the multi-information display.
Press
When the "TRC OFF" indicator light comes on even if
pressed (vehicles with a drive monitor display)
TRC is temporary deactivated. If the indicator light continues to remain on,
contact your Toyota dealer.
When the message is displayed on the multi-information display show-
ing that TRC has been disabled even if
cles with a multi-information display)
TRC is temporary deactivated. If the information continues to show, contact
your Toyota dealer.

Operating conditions of hill-start assist control

When the following four conditions are met, the hill-start assist control will
operate:
Vehicles with a continuously variable transmission: The shift lever is in a
position other than P or N (when starting off forward/backward on an upward
incline).
Vehicles with a manual transmission: The shift lever is in a position other
than R when starting off forward on an upward incline, or the shift lever is in
R when starting off backward on an upward incline.
The vehicle is stopped.
The accelerator pedal is not depressed.
The parking brake is not engaged.
VIOS_OM_GE_OM52L06E(TMT)_OM99V20b(TDB)_OM52L61E(TMP)_0D053(IMC)
again to turn the systems back on.
for more than 3
has not been
has not been pressed (vehi-

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Yaris sedan

Table of Contents