Fixed With A Seat Belt - Toyota VIOS Owner's Manual

Installing child restraint system using a seat belt
■
Install the child restraint system in accordance to the operation
manual enclosed with the child restraint system.
If the child restraint system on hand is not within the "universal" cat-
egory (or the necessary information is not in the table), refer to the
"Vehicle List" provided by the child restraint system maker for vari-
ous possible installation positions, or check the compatibility after
asking the retailer of the child seat. (→P. 97, 98, 103)
1 If installing the child restraint system to the front passenger seat
is unavoidable, refer to P. 93 for front passenger seat adjustment.
2 If the head restraint interferes with the child restraint system
installation and the head restraint can be removed, remove the
head restraint. Otherwise, put the head restraint in the upper
most position. (P. 189)
3 Run the seat belt through the
child restraint system and
insert the plate into the
buckle. Make sure that the
belt is not twisted. Securely
fix the seat belt to the child
restraint system in accor-
dance
enclosed
restraint system.
4 If your child restraint system
is not equipped with a lock-
off (a seat belt locking fea-
ture),
restraint system using a lock-
ing clip.
5
After installing the child restraint system, rock it back and forth to
ensure that it is installed securely. (P. 110)
VIOS_OM_GE_OM52L06E(TMT)_OM99V20b(TDB)_OM52L61E(TMP)_0D053(IMC)
to the directions
with the child
secure the child
1-2. Child safety
109
1