Table of Contents
Advertisement
2-4. Using other driving systems
■
Turning off both TRC and VSC systems
To turn the TRC and VSC systems off, press and hold
seconds while the vehicle is stopped.
The "TRC OFF" indicator light and the VSC off indicator light will come on.
Press the button again to turn the systems back on.
■
Sounds and vibrations caused by the ABS, brake assist, TRC and VSC
systems
●
A sound may be heard from the engine compartment when the brake
pedal is depressed repeatedly, when the engine is started or just after the
vehicle begins to move. This sound does not indicate that a malfunction
has occurred in any of these systems.
●
Any of the following conditions may occur when the above systems are
operating. None of these indicates that a malfunction has occurred.
• Vibrations may be felt through the vehicle body and steering.
• A motor sound may be heard after the vehicle comes to a stop.
• The brake pedal may pulsate slightly after the ABS is activated.
• The brake pedal may move down slightly after the ABS is activated.
■
EPS operation sound
When the steering wheel is operated, a motor sound (whirring sound) may
be heard. This does not indicate a malfunction.
■
Automatic reactivation of TRC and VSC systems
After turning the TRC and VSC systems off, the systems will be automati-
cally reactivated in the following situations:
●
Vehicles without a smart entry & start system: When the engine switch is
turned to "LOCK" position
●
Vehicles with a smart entry & start system: When the "ENGINE START
STOP" switch is turned off
●
If only the TRC system is turned off, the TRC will turn on when vehicle
speed is more than approximately 50 km/h (31 mph).
If both the TRC and VSC systems are turned off, automatic reactivation
will not occur when vehicle speed increases.
194
for more than 3
Advertisement
Table of Contents
