Setting Automatic Connection Of The Device On Or Off; Displaying The Device Status; Setting The Automatic Connection Confirmation Display To On Or Off - Toyota VIOS Owner's Manual

Setting automatic connection of the device on or off

If "BT power" is set to on, the registered device will be connected
automatically when the engine switch is turned to the "ACC" position
(vehicles without a smart entry & start system) or ACCESSORY mode
(vehicles with a smart entry & start system).
1 Select "BT power" using the "TUNE >" or "< SELECT" button, and
press the "SETUP·ENTER" button.
2 Select "ON" or "OFF" using the "SETUP·ENTER" button.

Displaying the device status

Select "Bluetooth
and press the "SETUP·ENTER" button.
● Displaying the device name
Select "Device name" using the "TUNE >" or "< SELECT" button,
and press the "SETUP·ENTER" button.
● Displaying the device address
Select "Device address" using the "TUNE >" or "< SELECT" button,
and press the "SETUP·ENTER" button.
*
: The Bluetooth
Bluetooth SIG, Inc.

Setting the automatic connection confirmation display to on or off

If the "Display setting" is set to on, the Bluetooth
player connection status will be displayed when the engine switch is
turned to the "ACC" position (vehicles without a smart entry & start
system) or ACCESSORY mode (vehicles with a smart entry & start
system).
1
Select "Display setting" using the "TUNE >" or "< SELECT" button,
and press the "SETUP·ENTER" button.
2
Select "ON" or "OFF" using the "SETUP·ENTER" button.
VIOS_OM_GE_OM52L06E(TMT)_OM99V20b(TDB)_OM52L61E(TMP)_0D053(IMC)
*
info" using the "TUNE >" or "< SELECT" button,
®
word mark and logos are registered trademarks owned by
5-7. "SETUP" menu
®
phone/portable
359
5