Table of Contents
Advertisement
Troubleshooting
The remote control does not function
The timer is not working.
The Clock/Timer setting is erased.
22
– Reduce the distance between the remote control
and the system.
– Insert the batteries with their polarities
(+/– signs) aligned as indicated.
– Replace the batteries.
– Point the remote control directly toward
IR sensor on the front of the system.
– Set the clock correctly.
– Press TIMER ON/OFF to switch on the timer.
– If a recording is in progress, stop the recording.
– Power has been interrupted or the power cord
has been disconnected. Reset the clock/timer.
Advertisement
Table of Contents
Troubleshooting
