Basic Functions; Switching The System On; Power-Saving Automatic Standby; Adjusting Volume And Sound - Philips FWM143/37B User Manual

IMPORTANT:
Before you operate the system, complete
the preparation procedures.

Switching the system on

● Press STANDBY-ON y (POWER y on the
remote).
➜ The system will switch to the last selected
source.
Switching the system to Eco Power
Standby mode
● Press STANDBY-ON y (POWER y on the
remote) in the active mode.
➜ The system enters Eco power standby (the
ECO POWER LED is on) or normal standby
with clock display.
➜ The volume level (up to a maximum volume
level of 15), interactive sound settings, last
selected source and tuner presets will be
retained in the player's memory.
● If the system is in normal standby with clock
display, press and hold STANDBY-ON y
(POWER y on the remote) for 3 seconds or
more to switch to Eco power standby or vice
versa.

Power-saving automatic standby

The power-saving feature automatically switches
to standby 30 minutes after a tape or CD
playback has ended and no control is operated.

Basic Functions

Adjusting volume and sound

Press VOLUME 3/4 to
1
increase or decrease
volume.
➜ Display shows the
volume level UoL and a
number from 0-40.
2
Press DBB to switch bass
enhancement on or off.
➜ Display shows: DBB if
the DBB is activated.
3
Press DSC on the remote to repeatedly to
select the desired sound effect:CLASSIC,JAZZ,
POP or ROCK.
4
Press MUTE on the remote control to stop
sound play-back instantly.
➜ Playback will continue without sound and the
display shows MUTE.
● To start sound playback you can:
– press MUTE again;
– adjust the volume controls.
13