Whitebalance Tab - Omron STC-S133MIP Series Product Specifications And User's Manual

WhiteBalance Tab

Push lock pin
N/A
White balance mode
ATW mode
The white balance control automatically with the indoor/outdoor judgement and estimate the light source.
ATW mode is less inference for the color saturated target.
All pull in mode
The white balance control automatically without dependence of the indoor/outdoor light source.
The wide rage color pull into the white.
This mode re-adjust the white balance by inference for the color saturated target.
Hold mode
Hold the white balance gain and stop AWB operation.
Saved white balance gain is applied when power on the camera with the hold mode.
MWB mode
The white balance control with the specific color temperature.
User mode
5 sets of the R and B gain are selectable.
OnePush mode
The white balance control automatically by the all pull in then hold the white balance gain and stop the white balance control.
Push Lock button
The white balance control automatically then hold the white balance gain and stop the white balance control.
MWB operation
Set the color temperature for MWB mode.
ATW indoor/outdoor mode
Pull in frame for the indoor and outdoor are selectable.
Pull in the blue sky then suppress red at Outdoor (blue sky) mode.
Other settings
Set the sensitivity for ATW mode and all pull in mode.
STC-S133MIP
Product Specifications and User's Guide
No.17S023-02
41/64