6
User's guide for communication software
The settings of STC-S133MPI camera can be change by below methods:
Camera setting changes directly through I2C.
(Please refer "STC-S133 Series Protocol Specifications" for communicating to camera.)
Camera setting change from Windows PC through Raspberry Pi.
(Please refer below procedure.)
6.1
Environmental software and tools
Camera communication software: KSACtrl v2.03 or newer
Image viewing software: StMIPViewer
Raspberry Pi Model 3 (Camera does not include this)
Adapter cable for USB from / to UART (Camera does not include this)
6.2
Connection configuration
STC-S133MIP
6.3
Communication method
UART from / to I2C protocol converts on Raspberry.
1) Between STC-S133MIP and Raspberry Pi
I2C Bus, 400 kHz
2) Between PC and Raspberry Pi
UART (RS232C compliant), Binary communication
Baud rate
Data bit
Parity
Stop bit
Flow control
STC-S133MIP
Product Specifications and User's Guide
Monitor
Display image
Raspberry Pi
15pin FFC
StMIPViewer
115,200bps
8 bits
None
1 bit
None
PC
UART ⇔ USB
KSACtr
No.17S023-02
23/64