Table of Contents
Advertisement
6.7
The descriptions for the buttons
Read All
Read out all camera settings in the camera. Please select this button every time when the camera power is
turning on.
This software stores as the camera default settings in to the Flash memory on the camera when first time select
"Read All" button after run KSACtrl software.
* The camera settings are not reflecting as default data from the second time select "Read all" button.
Note.1: It will take time to read out all camera settings while the image streaming.
It will not take long time when reading out the camera settings without the image stream
Note.2: Please read out all camera settings without the image streaming while the camera connects to USB2.0
port.
It is possible to stop freeze the image streaming if read out all camera settings while the image
streaming.
DSP -> FLASH
Save the camera settings (changed settings) in to the Flash memory on the camera.
All changed camera settings save to the Flash memory at once.
Reset
N/A
STC-S133MIP
Product Specifications and User's Guide
No.17S023-02
26/64
Advertisement
Table of Contents
