Automatic Sound; Tone And Volume Controls; Loudness; Equalizer - Blaupunkt ACAPULCO Acapulco CD51 Operating Instructions Manual

Use the or
the frequency level.
To select the next filter, press first
OK ; and then one of the
buttons :.
When all settings are complete,
press the DEQ+ button <.
In addition to automatic sound meas-
urement, you can also make manual
settings using the 5-band parametric

equalizer.

In this case, parametric means that in
each of the five filters, one individual fre-
quency can be emphasised or reduced
(with a gain of +8 to -8).
The following filters are available:
SUB LOW EQ
LOW EQ
MID EQ
MID/HIGH EQ
HIGH EQ
These filters can be set without using
any measuring instruments. You can use
them to make a significant difference to
the properties of the sound in the vehi-
cle.
56
button : to set
32 - 50 Hz
63 - 250 Hz
315 - 1,250 Hz
1,600 - 6,300 Hz
8,000 - 12,500 Hz
For the purposes of this adjustment, we
recommend you use a CD you know
well.
Before making any adjustments to the
equalizer, set the tone and volume con-
trols to zero and deactivate loudness.
For more information on this, read the
section on "Tone and volume controls".
Start playing a CD.
Assess the sound you hear.
Now consult the "Equalizer Adjust-
ment Guide" table for "Sound Qual-
ity".
Adjust the equalizer values as de-
scribed under "Action".
Press the DEQ+ button <.
Use the or
"DIGITAL EQ".
Use the or
the filter.
Press the or
button : to select the
Press the
frequency.
Adjust the level with the
button :.
To select the next filter, press first
the OK button ; then the
button :.
When you have completed all the
settings, press the DEQ+ button
<.
button : to select
button : to select
button :.
or
or