Blaupunkt ACAPULCO Acapulco CD51 Operating Instructions Manual page 20

Press button 5 MIX > until
"MIX OFF" flashes up and "MIX"
disappears.
To listen to short samples of all
tracks on all the CDs in the CD
changer in ascending order, press
the OK button ; for longer than 2
seconds.
"SCAN" appears in the display.
To halt the scan, press OK ;
briefly.
The track currently being sampled will
continue to play.
Note:
The lengths of these samples can be
set. Please consult the section on "Set-
ting Scan Time" under "Radio Opera-
tion".
Press button 3
"PAUSE" appears in the display.
Press button 3
Play resumes.
50
>.
> again.
In order to recognise your CDs more
effectively, the car radio allows you to
give individual names to up to 99 CDs.
The names may have up to seven char-
acters.
If you attempt to assign more than 99
names, the display will show "FULL".
Press the MENU button 8.
Use the or
"CDC NAME".
Press the or
The device is now in selection mode.
Choose the CD that you want to
name with the
Press the or
The device enters edit mode. If your
chosen CD is not yet named, seven
underscores appear in the display.
The current entry location flashes.
Use the or
your characters. If a space is re-
quired, select the underscore.
Use the or
change the input location.
To save the name, press the
MENU button 8 or OK ;.
Start playing the CD whose name
is to be deleted.
Press the MENU button 8.
button : to select
button :.
button :.
or
button :.
button : to select
button : to