Blaupunkt ACAPULCO Acapulco CD51 Operating Instructions Manual page 11

To switch between memory levels
and wavebands, briefly press the
BND/TS button 5.
There are a number of ways to set the
station.
Press the or
The next station that can be received is
tuned in.
To tune to a station manually
Press the or
Note:
Manual station tuning is only possible
when the RDS convenience function is
switched off.
If a station provides several programs,
it is possible to browse through this
"chain" of stations.
Press the or
change to the next link in the sta-
tion chain.
Note:
To use this function, the RDS conven-
ience function must be active.
This means you can only switch to a
station you have already received at
least once. Use the Scan or Travelstore
function for this purpose.
button :.
button :.
button : to
You can choose whether to search only
for stations with strong signals, or wheth-
er weak stations should be included.
Press the MENU button 8.
button : until "SENS"
Press the
appears in the display.
button :.
Press the
The current sensitivity level appears in
the display. "SENS HI6" means maxi-
mum sensitivity, "SENS LO1" means
minimum sensitivity. When "SENS LO"
is selected, the display shows "lo".
Set the desired sensitivity with the
buttons :.
When the setting process is com-
plete, press the MENU button 8
or OK ;.
Choose between memory levels
FM1, FM2, FMT or the MW and
LW wavebands.
Tune to the station you want.
Choose one of the station buttons
1 - 6 > on which you want to store
the station and hold it pressed for
longer than 2 seconds.
41