Brother TD-4650TNWB User Manual page 19

5. Open the Roll Compartment Cover.
Slide the Roll Guides outwards,
and then align the paper width with
the Roll Guides. Push down and
slide the lock tab to lock the Roll
Guides into place.
6. Install the label roll as described in
section 3.2.1 Load Label
7. Feed the media through the media
sensor. Adjust the Media Guide
Tips to fit the label width.
8. Use the Brother Printer
Management Tool (BPM) or LCD
menu to set the media sensor type
and calibrate the selected sensor.
Note
Calibrate the Gap/Black Mark Sensor every time you change the media.

For more information about sensor calibration, see section

Sensor using the
Roll.
BPM.
Media Guide Tips
15
7.2 Auto-Calibrating the Media