Before You Begin - Fisher & Paykel DCS GDSBE1 User Manual

Double side burner/griddle
Table of Contents

Advertisement

Ensure the installer has completed the final checklist in the installation instructions.
z z
Read this guide, taking special note of the Safety and warnings section.
z z
Remove all packaging and dispose of it responsibly. Recycle items that you can.
z z
6
7
8
2
1
Seasoning the griddle
1 Clean the griddle thoroughly with hot, soapy water to remove any protective coating.
2 Rinse with 1/2 cup of water and 1/4 cup white vinegar. Dry thoroughly.
3 Pour 2 teaspoons of vegetable oil into the center of the griddle and rub over the
surface.
4 Turn the dial to a medium heat setting.
5 Turn the dial to
Repeat as needed.

BEFORE YOU BEGIN

when the oil begins to smoke and allow the griddle to cool.
OFF
Griddle and Side Burner Features
1 Burner control dials
2 Griddle control dial
3 Burner grates
4
4 Burners
3
5 Drip pan
6 Griddle plate
4
7 Grease cup
8 Griddle vent
Not shown: lid
Dial halos
When a dial is in use, an orange halo
around that dial will illuminate. This
will change from orange to white if the
dial is turned to
remains active. If all dials are turned
, all halos will dim.
OFF
Multiple DCS Series 9 products may
1
be linked together to allow for cross-
product halo illumination. To allow for
5
this functionality, an approved DCS
kit is required and can be purchased
separately from your local DCS dealer.
but another dial
OFF
9

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dcs sbe1 series

Table of Contents