Table of Contents
Advertisement
4-3.Operating the lights and wipers
Headlight switch
The headlights can be operated
manually or automatically.
Operating instructions
Operating the
the lights as follows:
1
The front position, tail, license
plate and instrument panel lights
turn on.
2
The headlights and all the
lights listed above turn on.
3
The headlights, daytime run-
ning lights (P.241) and all the
lights listed above turn on and off
automatically.
LS500h_OM_General_OM50J66E
4-3. Operating the lights and wipers
AUTO mode can be used when
■
The power switch is in ON mode.
Daytime running light system
■
To make your vehicle more visible to other
drivers during daytime driving, the daytime
running lights turn on automatically when-
ever hybrid system is started and the park-
ing brake is released with the headlight
switch turns on
switch in the
brighter than the front position lights.) Day-
time running lights are not designed for use
at night.
Headlight control sensor
■
The sensor may not function properly if an
object is placed on the sensor, or anything
that blocks the sensor is affixed to the wind-
shield.
Doing so interferes with the sensor detect-
ing the level of ambient light and may cause
the automatic headlight system to malfunc-
tion.
Automatic light off system
■
Except for Korea and Malaysia
The headlights and all lights turn off after
the power switch is turned off and the
driver's door is opened.
To turn the lights on again, turn the power
switch to ON mode, or turn the light switch
off once and then back to the
position.
For Korea
When the headlights are on: The head-
●
lights and tail lights turn off 30 seconds
after the driver's door is opened and
closed if the power switch is turned to
ACCESSORY mode or turned off. (The
241
position. (Illuminate
or
4
Advertisement
Table of Contents
