Table of Contents
Advertisement
334
4-5. Using the driving support systems
Conditions under which the vehi-
■
cle-to-vehicle distance control mode
may not function correctly
In the case of the following conditions,
operate the brake pedal (or accelerator
pedal, depending on the situation) as nec-
essary.
As the sensor may not be able to correctly
detect vehicles ahead, the system may not
operate properly.
When the road curves or when the lanes
●
are narrow
When steering wheel operation or your
●
position in the lane is unstable
When the vehicle ahead of you deceler-
●
ates suddenly
When driving on a road surrounded by a
●
structure, such as in a tunnel or on a
bridge
While the vehicle speed is decreasing to
●
the set speed after the vehicle acceler-
ates by depressing the accelerator pedal.
LS500h_OM_General_OM50J66E
*
Cruise control
*
: If equipped
Use the cruise control to maintain a
set speed without depressing the
accelerator pedal.
System components
Meter display
■
Set speed
A
Indicators
B
Operation switches
■
"+RES" switch
A
Cruise control main switch
B
"-SET" switch
C
Cancel switch
D
Advertisement
Table of Contents
