Related Manuals for FWE ETC Series
Summary of Contents for FWE ETC Series
- Page 1 OPERATING INSTRUCTIONS ADJUSTABLE UPRIGHTS ETC SERIES CABINETS FWE Parts Department: www.FWEparts.com Phone: 815 459 7500 FAX: 815 459 7989...
- Page 2 Description of the ETC Adjustable Upright Assembly Top Pin Alignment Upright Holes Assembly (in sets consists of a of pairs) left side rack and a right side rack Tray Slide Tray Slide Mounting Holes (Refer to Tray Figure 4) Slide Bottom Pin Alignment Holes (in sets of pairs)
- Page 3 ETC Adjustable Upright Assembly Mounts to Top and Bottom Alignment Pins Alignment Pins are mounted at the inside top panel and at the inside bottom floor of each compartment, having four (4) Alignment Pins total per each set of uprights. (Location of the bottom Alignment Pins is shown in Figure 2.) Position each Upright Assembly to fit your tray size by choosing a set of Alignment Holes.
- Page 4 Choosing the Position of your Upright Assembly to fit your tray size: 16" x 22" Trays 15" x 20" Trays 14" x 18" Trays Both uprights located in outward position. One upright in outward position, Alignment one upright in Hole inward position.