Setup; Connecting The Battery - Toro Pro Force 44553 Operator's Manual

Setup

Loose Parts
Use the chart below to verify that all parts have been shipped.
Procedure
1
2
3
4
Media and Additional Parts
Description
Operator's Manual
Engine Manual
Operator Training Material
Remote control
Note:
Determine the left and right sides of the
machine from the normal operating position.
1

Connecting the Battery

Parts needed for this procedure:
–
Petroleum jelly (not supplied—use as required)
Procedure
1. Remove the clips securing the battery cover to
the battery box (Figure
Description
Petroleum jelly (not supplied—use as
required)
Machine assembly
Hitch
Bolt (3/8 x 3 inches)
Flange nut (3/8 inch)
No parts required
Handheld remote
AAA batteries
Screws, small
3).
Qty.
–
1
1
2
2
–
1
4
6
Qty.
1 Read before operating.
1 Use to reference the engine operation and maintenance.
1 View before operating the machine.
1 Use to remotely operate the blower.
1. Battery cover
8
Use
Connect the battery.
Mount the hitch to the machine.
Connect the machine to the towing
vehicle.
Assemble the handheld remote.
Use
Figure 3
2. Battery clip
g029816