Maintenance Fundamentals; Pre-Ride Inspection - Honda NC750X Manual

Maintenance Fundamentals

Pre-ride Inspection

To ensure safety, it is your responsibility to
perform a pre-ride inspection and make sure
that any problem you find is corrected. A pre-
ride inspection is a must, not only for safety, but
because having a breakdown, or even a flat tire,
can be a major inconvenience.
Check the following items before you get on
your motorcycle:
Tire tread wear and air pressures are within
●
limits. P. 90
2
Lights, horn, and turn signals operate
●
normally.
Check the condition of the drive chain.
●
Adjust slack and lubricate as needed.
Check the following items if you are carrying a
passenger or cargo:
Combined weight is within load limits.
●
P. 172
2
Cargo is secured properly.
●
80
Check the following items after you get on your
motorcycle:
Throttle action moves smoothly without
●
binding.
Brake lever and pedal operate normally.
●
Check the fuel level and refuel when
●
needed.
Engine stop switch functions properly.
●
P. 50
2
Check the following items at regular intervals:
Oil level is between the upper and lower
●
level marks.
Brake fluid level is
●
Front: above the LOWER level mark.
Rear: between the UPPER and LOWER level
P. 87
2
marks.
2
Engine coolant level is between the UPPER
●
and LOWER level marks.
Side stand functions properly.
●
NC750XD
●
Parking brake works properly.
P. 122
2
P. 14, P. 68
2 2
P. 103
2
P. 111
P. 109
2
2
2
P. 111
2
P. 114
P. 113