Required Oil - Honda NC750X Manual

Engine Oil Changing Engine Oil & Filter
u
Apply a thin coat of engine oil to the
8.
rubber seal of a new oil filter.
Install the new oil filter and tighten.
9.
Torque: 19 lbf·ft (26 N·m, 2.7 kgf·m)
Install a new sealing washer onto the
10.
drain bolt. Tighten the drain bolt.
Torque: 22 lbf·ft (30 N·m, 3.1 kgf·m)
106
Rubber seal
Oil filter
Fill the crankcase with the recommended
11.
oil ( P. 86, P. 173) and install the oil fill
2 2
cap/dipstick.

Required oil

When changing oil & engine oil
filter:
3.6 US qt (3.4 L)
When changing oil only:
NC750X/XA
3.3 US qt (3.1 L)
NC750XD
3.4 US qt (3.2 L)
Check the oil level.
12.
Check that there are no oil leaks.
13.
Install the lower cowl.
14.
P. 103
2