Selecting the setting mode:
Turn the ignition switch to the ON position.
a
Press and hold the SEL button and SET
b
button until the ON/OFF setting display
changes.
Press the SEL button until the desired setting
c
mode is displayed. When the SEL button is
pressed, the setting mode will be changed.
When the SET button is pressed, each
d
setting mode will be changed.
To return to the ordinary display from the
setting mode:
The SEL button and/or SET button is not
●
pressed for about 30 seconds.
Turn the ignition switch to the OFF
●
position, and then to the ON position.
Press and hold SEL button and SET
●
button.
While operating settings, each setting will be
cancelled if the SET button is not pressed.
Continued
37