Honda NC750X Manual page 110

Engine Oil Changing Clutch Oil Filter
u
Install the new clutch oil filter with the
3.
rubber seal facing in, toward the engine.
You will see "OUT-SIDE" mark on the
clutch oil filter body, toward the filter
cover.
Replace the O-ring and apply a thin coat
4.
of engine oil to the new O-ring before
installing it.
Install the spring and the clutch oil filter
5.
cover.
Install the clutch oil filter cover bolts and
6.
tighten.
Apply a thin coat of engine oil to the
7.
rubber seal of a new engine oil filter.
P. 106
2
Install a new engine oil filter and tighten.
8.
Torque: 19 lbf·ft (26 N·m, 2.7 kgf·m)
108
Replace the new sealing washer. Install
9.
the drain bolt and tighten.
Torque: 22 lbf·ft (30 N·m, 3.1 kgf·m)
Fill the crankcase with the recommended
10.
oil ( P. 86, P. 173) and install the oil fill
2 2
cap/dipstick.
Required oil
When changing oil, engine oil filter
& clutch oil filter:
3.6 US qt (3.4 L)
Check the oil level.
11.
Check that there are no oil leaks.
12.
Install the lower cowl.
13.
P. 103
2