Fender Mustang GTX Series Owner's Manual page 54

To clear a preset from the preset list, press the MENU utility button, use the ENCODER to scroll to and select
"EQ & AMP SETTINGS", and then "PRESET ORGANIZER" as described on the previous page. Then use the EN-
CODER to scroll to and select "CLEAR PRESET" (see illustration below).
The selected preset's box will be shown in red. Use the ENCODER to scroll to a preset to be cleared; press the EN-
CODER on the highlighted preset to clear it. Before clearing the preset, users are prompted to indicate whether
they really wish to proceed by choosing "YES" or "NO", with a warning that doing so may affect setlist(s). If "YES"
is chosen by pressing the ENCODER on it, the preset is cleared and its numbered slot is shown as "EMPTY" (see
illustrations below). If "NO" is chosen (not shown), users are returned to the previous screen.
To restore the entire list of presets to the original factory configuration, enter the PRESET ORGANIZER menu as de-
scribed above, and use the ENCODER to scroll to and select "RESTORE PRESETS" (see illustration below). A "YES"/"-
NO" warning prompt will appear as described above. If "YES" is chosen, the factory presets will be reloaded, after
which the amp must be turned off and back on again. If "NO" is chosen, users are returned to the previous screen.
back
MOVE PRESET
CLEAR PRESET
RESTORE PRESETS
10 - PURPLE RAI>
back
11 - BASSBREAKE>
12 - BREATHE
13 - SYNTH WIZ
14 - BASIC IIC+>
CLEAR
"12 - BREATHE"?
WARNING: THIS MAY AFFECT SETLIST(S)
YES
NO
10 - PURPLE RAI>
back
11 - BASSBREAKE>
12 - EMPTY
13 - SYNTH WIZ
14 - BASIC IIC+>
back
MOVE PRESET
CLEAR PRESET
RESTORE PRESETS
MENU
MENU
MENU
MENU
MENU
52