Fender Mustang GTX Series Owner's Manual page 43

Up to the first five effects in a preset are assigned this way; in a preset with only two effects, for example, they
are assigned to FUNCTION buttons "FX1" and "FX2", as in the example below.
EFFECTS mode example showing a preset with two effects, each assigned to FUNCTION buttons FX1 and FX2. The illuminated red FUNC-
TION LEDs above FX1 and FX2 indicate that both effects are on; both can be turned off by stepping on their respective FUNCTION buttons.
EFFECTS mode also offers a "category" setting in which five entire categories of effects are assigned to the
footswitch FUNCTION buttons, letting the user turn all effects of a particular type on and off in the active pre-
set. In this setting, Stompbox effects are assigned to FUNCTION button FX1, Modulation effects are assigned
to FUNCTION button FX2, Delay effects are assigned to FUNCTION button FX3, Reverb effects are assigned to
FUNCTION button FX4 and Filters+Pitch effects are assigned to FUNCTION button FX5. Note that the Dynam-
ics+EQ effects category can not be assigned to the footswitch.
To use this EFFECTS mode setting, press the MENU utility button on the amp control panel and use the EN-
CODER to scroll to and select the "FOOTSWITCH" menu option:
Use the ENCODER to scroll to and select "GTX-7 (7-BUTTON)" from the menu of devices shown, then use the
ENCODER to scroll to and select "FX ASSIGN":
SETLIST
CLOUD PRESETS
WiFi & BLUETOOTH
EQ & AMP SETTINGS
FOOTSWITCH
TUNER
back
MGT-4 (4-BUTTON)
GTX-7 (7-BUTTON)
EXP-1 (EXPRESSION)
back
FX ASSIGN
LOOPER ON
41
MENU
MENU
MENU