DeWalt D24000 Instruction Manual page 41

Optional accessories
Legstand (fig. W)
The D240001 legstand has been designed for intstalling your tile saw as a
stand-alone machine.
Range of cutting discs available
Type of disc Dimensions (diameter x bore)
DT3733 250 x 25.4 mm
DT3734 250 x 25.4 mm
Consult your dealer for further information on the appropriate accessories.
Transporting (fig. X1 & X2)
The detachable parts can be stored in the water basin for easy transportation.
• Drain the water basin. See "Maintenance".
• Remove the edge guide and the extension table.
• Lock the sliding table in position.
• Remove the water collectors.
• Lift the machine out of the water basin as shown.
• Place the collectors into the water basin in the orientation as shown.
• Turn the water basin upside down.
• Place the edge guide and the extension table into the water basin in
the orientation as shown.
When carrying the machine, always seek assistance.
The machine is too heavy for one person to handle.
Maintenance
Your D WALT power tool has been designed to operate over a long
E
period of time with a minimum of maintenance. Continuous satisfactory
operation depends upon proper tool care and regular cleaning.
Draining the water basin (fig. Y)
The water basin must be drained after each use.
• Place the water pump on the tray (75).
• Place a suitable container under the drain plug (29).
• Remove the drain plug.
• Allow ample time for the liquid to drain.
• After the liquid has been drained, re-install the drain plug.
• Dispose of the liquid with due care for the environment.
Adjusting the table rolling resistance (fig. Z)
To take out the clearance between the table and the rails, proceed as
follows:
• Loosen the rail height screws (76).
• Adjust the rail height adjusters (77) until the table moves smoothly.
• Tighten the rail height screws.
Cleaning
Keep the ventilation slots clear and regularly clean the housing with a soft
cloth.
The following cleaning operations must be performed every day.
• Insert the water pump into a bucket of clean water and pump the water
through the hose system.
• Wipe the rails and support arm with a grout sponge or a rag.
• Spray the water basin and the sliding table with clear water. Wipe any
dust residue away with a grout sponge.
Lubrication
Your power tool requires no additional lubrication.
Protecting the environment
Usage
Ceramic tile
Porcelain/stone tile Should you find one day that your D
or if it is of no further use to you, do not dispose of it with household
waste. Make this product available for separate collection.
Local regulations may provide for separate collection of electrical products
from the household, at municipal waste sites or by the retailer when you
purchase a new product.
D WALT provides a facility for the collection and recycling of D
E
products once they have reached the end of their working life. To take
advantage of this service please return your product to any authorised
repair agent who will collect them on our behalf.
You can check the location of your nearest authorised repair agent by
contacting your local D
manual. Alternatively, a list of authorised D
details of our after-sales service and contacts are available on the Internet
at: www.2helpU.com.
Separate collection. This product must not be disposed of with
normal household waste.
WALT product needs replacement,
E
Separate collection of used products and packaging allows
materials to be recycled and used again. Re-use of recycled
materials helps prevent environmental pollution and reduces
the demand for raw materials.
WALT office at the address indicated in this
E
E N G L I S H
WALT
E
WALT repair agents and full
E
41