Dimensions; Torque Requirements - Exmark STARIS E Series Operator's Manual

Specifications
– 0-3.5 mph (6 km/hr) reverse.
• Drive wheels release valves allow machine to be
moved when engine is not running.
Wheel Drive System
Drive wheels are direct coupled to Parker wheel drive
motors with 1 inch (25.4 mm) tapered shaft.
Tires & Wheels
Front Caster–All Models
Quantity
Tread
Size
Drive Tires
32 Inch Models
Pneumatic
(Air-Filled)
Quantity 2
Tread Kenda K500
Size 21 x 7.00–10
Ply Rating 4
Pressure 13 psi
(90 kPa)
Cutting Deck
• Cutting Width:
– 32 inches (81.3 cm)
– 36 inches (91.4 cm)
• Discharge: Side
• Blade Size: (2 ea.):
– 32 Inch Models: 16.25 inches (41.3 cm)
– 36 Inch Models: 18.00 inches (45.7 cm)
• Blade Spindles: Solid steel spindles with 1.00 inch
(25.4 mm) I.D. bearings.
• Deck Drive:
– Electric clutch mounted on engine shaft.
– Blades driven by one belt (w/self-tensioning
idlers).
Semi-
Pneumatic
2
Smooth
9 x 4.50-5
36 Inch Models
Pneumatic
(Air-Filled)
2
Kenda K500
21 x 8.50–10
4
13 psi
(90 kPa)
• Deck: Full floating deck is attached to support
frame, removable for service. Deck design allows
for bagging, mulching or side discharge.
• Deck Depth: 5.0 inches (12.7 cm)
• Cutting Height Adjustment:
Adjusts from 1 inch (2.5 cm) to 5 inches (12.7 cm)
in 1/2 inch (12.7 mm) increments
• Mulching Kit: Optional
• Bagger: Optional

Dimensions

Overall Width:
32 Inch Models 36 Inch Models
Deflector Up 33.7 inches (85.6
cm)
Deflector Down 44.9 inches
(114.0 cm)
Overall Length:
32 and 36 Inch Models
58.1 inches (147.6 cm)
Overall Height:
47.3 inches (120.1 cm)
Tread Width: (Outside to Outside of
Tires, Widthwise)
32 Inch Models
33.2 inches (84.3 cm)
Curb Weight:
737 lb (334 kg)
Note: Weights will vary slightly depending on deck
size.

Torque Requirements

Bolt Location
Cutter Housing Spindle
Nut
Blade Mounting Bolt
(lubricate with anti-seize)
12
36.6 inches (93.0
cm)
48.0 inches
(121.9 cm)
36 Inch Models
36.2 inches (91.9 cm)
Torque
130-160 ft-lb
(176-217 N-m)
50-60 ft-lb (68-81 N-m)