Installation; Operating Safeguards - Panasonic KX-HNC850 Information And Troubleshooting Manual

• Do not overload power outlets and
extension cords. This can result in the risk of
fire or electric shock.
• Completely insert the AC adaptor/power
plug into the power outlet. Failure to do so
may cause electric shock and/or excessive
heat resulting in a fire.
• Regularly remove any dust, etc. from the AC
adaptor/power plug by pulling it from the
power outlet, then wiping with a dry cloth.
Accumulated dust may cause an insulation
defect from moisture, etc. resulting in a fire.
• Unplug the product from power outlets if it
emits smoke, an abnormal smell, or makes
an unusual noise. These conditions can
cause fire or electric shock. Confirm that
smoke has stopped emitting and contact
us at http://shop.panasonic.com/support
• Unplug from power outlets and never touch
the inside of the product if its casing has
been broken open. Danger of electric shock
exists.
• Never touch the plug with wet hands.
Danger of electric shock exists.
• Do not connect non-specified devices.

Installation

• Do not allow the power cord to be
excessively pulled, bent or placed under
heavy objects.
• Do not place the product near wirelessly
controlled devices such as automatic doors.
• Do not place the product on soft, unstable
material.

Operating safeguards

• Do not look directly at the LED when it is lit.
Doing so may cause damage to eyes.
• Consider the installation environment
carefully when installing the product. Pay
particular attention to infants, children, and
the elderly, as they may be more sensitive to
bright lights.
• When you move the product, lift the
product holding the poles or the bottom of
the product base. There may be a risk of
injuryor damage to your property if the
product is dropped.
• Do not put flammable objects such as cloth
or paper on the product.
Medical
• Consult the manufacturer of any personal
medical devices, such as pacemakers or
hearing aids, to determine if they are
adequately shielded from external RF (radio
frequency) energy. Wireless LAN features
operate between the frequencies listed
below, with a peak transmission power of
100mw:
2.412 GHz – 2.462 GHz
5.180 GHz – 5.320 GHz
5.500 GHz – 5.700 GHz
5.745 GHz – 5.825 GHz
• Do not use the product in Healthcare
facilities if any regulations posted in the area
instruct you not to do so. Hospitals or
Healthcare facilities may be using equipment
that could be sensitive to external RF energy.