Table of Contents
Advertisement
Screen Display
With the standard setting of your programming device, the display shown
Following
below appears following power-on:
Power-on
PhoenixBIOS Version 4.05
Copyright 1985-1995 Phoenix Technologies Ltd., All Rights
Reserved.
SIEMENS PG 760 Pentium
CPU = Pentium
0000640K System RAM Passed
0015360K Extended RAM Passed
System BIOS shadowed
Video BIOS shadowed
UMB upper limit segment address: F2xx
Press F2> to enter SETUP
If you press the F2 key when the above display is shown, you select the
ROM-based BIOS setup program. In this program you can set a number of
system functions and hardware configurations of your programming device.
The standard settings are effective on delivery. You can change these settings
using the BIOS setup. The modified settings become effective when you have
saved them and terminated the BIOS setup.
The following screen form appears when you start the BIOS setup:
Menu bar
Selectble
submenu
Operating keys
Figure 5-1 Main SETUP Menu
PG 760 Programming Device
C79000-G7076-C761-01
133 MHz
PhoenixBIOS Setup-Copyright 1985-95 Phoenix Technologies Ltd.
Main
Advanced
Security
System Time:
[ 15:55:32 ]
[ 11/17/1995 ]
System Date:
Diskette A:
[ 1.44 MB, 31/2" ]
Diskette B:
[ Not Installed ]
IDE Adapter 0 Master
(C: 1624 Mb)
IDE Adapter 0 Slave
(None)
IDE Adapter 1 Master
(None)
IDE Adapter 1 Slave
(None)
Video System:
EGA/VGA
Memory Cache:
Memory Shadow:
Boot Sequence:
[ A: then C: ]
Numlock:
[ Off ]
PG 740 Hardware Options
System Memory:
640 KB
Extended Memory:
15 MB
F1
Help
Select Item
+ / –
ESC
Exit
Select Menu
Enter Select
Configuring the PG 760
Power
Exit
Item Specific Help
,
Tab
Shift-Tab
selects field.
Help window
Change Values
F9
Setup Defaults
Sub-Menu
F10
Previous Values
, or
Enter
5-3
5
Advertisement
Table of Contents
