Table of Contents
Advertisement
Installing and Operating the PG 760
Connecting the
PG 760 to Other
Programming
Devices
3
3-10
If you want to connect your PG 760 to another programming device, you can
plug the appropriate connecting cable into the V.24 or TTY interface port.
You will find more detailed information on the connecting cables listed
below in Chapter 7.
Interface
Link
V.24 interface
PG 7xx with PG 7xx
TTY interface
PG 7xx with PG 6xx
Note
1)
When connecting the programming devices in series, make sure you
connect the cable the right way around (see Figure 3-6).
Adapter
PG 7XX
6ES5 731-6AG00
Figure 3-6
Direction of Connection: Adapter - Connecting Cable
Note
When connecting two programming devices via the TTY interface, you must
deactivate the COM1/TTY interface by changing the switch position (see
Chapter 4). When the PG 760 leaves the factory, this interface is always set
to active.
Connecting Cable
Adapter
6ES5 733-5BD20
Series connection of
6ES5 731-6AG00
6ES5 733-2xxx0
and
1)
6ES5 731-6AG00
Connecting cable
Active
Passive
PG 6XX
6ES5 733-2xxx0
PG 760 Programming Device
C79000-G7076-C761-01
Advertisement
Table of Contents
