LG 60PC1D Training Presentation page 62

To remove the Ribbon cable from the connector first carefully lift the Locking Tab from
the back and tilt it forward ( lift from the outside edge as shown in Fig 1). Gently slide the
Ribbon Cable free from the connector.
Fig 1
To reinstall the Ribbon Cable carefully slide it back into the slot see ( Fig 2 ), be sure it is seated
securely and press the Locking Tab back to the locked position see ( Fig 3).
Plasma Display Panel Troubleshooting - 2007
60PC1D Y Drive Boards
Fig 2
62
Troubleshooting
Fig 3