LG 60PC1D Training Presentation page 17

Y SUS Board Removal
Remove Cables P1 ( VS, VS, NC, GND, GND, GND, GND, VA, VA ), P2 ( GND, GND, 5VDC, 5VDC )
P3 ( GND, GND, GND, GND, 5VDC, 5VDC, 5VDC, 5VDC ), P4 ( Logic Signals ), P5 ( 5VDC, 5VDC,
GND, GND, GND, GND, GND, NC, VA, VA, VS, VS ), P6 ( GND, GND, 5VDC, VA ),
P7 ( GND, GND, 5VDC, VA ), P8 ( SUS_ DNT, 15V, 15V, SUS_ DNT, OC1_T_IN, OC2_T_IN, LET, NC,
SUS_DNT, DATA_T, CLKT_IN, SUS_DNT ), P10 ( SAME AS P8 ).
Remove 14 screws securing the Board.
Top Y Drive Board Removal
Remove 10 Screws from the Metal Bracket marked "A" ( see page 19 ) to gain access to the Top Y Drive
Board. Carefully remove the Ribbon Cables P8, P9, P12, P13, P14, P15 and Connectors P2 ( Refer to P8
on the Y SUS Board ), and P4 ( Floating Ground ). Remove 5 screws securing the Top Y Drive Board.
Bottom Y Drive Board Removal
Remove 10 screws from the Metal Bracket marked "A" ( see page 18 ) to gain access to the Bottom
Y Drive Board. Carefully remove the Ribbon Cables P6, P7, P16, P19, P20, P21 and Connectors P1
( Refer to P8 on the Y SUS Board ) and P3 ( Floating Ground ). Remove 5 screws securing the Bottom
Y Drive Board.
Control Board Removal
Remove Cables P101, P102, P103, P104, P105, P106, ( RGB Logic Signals ), P200 ( Y SUS Logic Signals ),
P300 ( 5VDC, 5VDC, 5VDC, 5VDC, GND, GND, GND, GND ). Remove 5 screws securing the Board.
Plasma Display Panel Troubleshooting - 2007
Disassembly Procedure 60PC1D
17
Troubleshooting