Table of Contents
Advertisement
Preparation for Use/Operation
Server in standby mode
Power-on indicator (position 6 on figure 15 on page 41) blinks green. The
ON/OFF button (position 7 in figure 15 on page 41) is operative (see also expla-
nation in table on page 41).
System fans speed slows down based on IPMI setting.
Ê Shut down all RGB applications.
Ê Press any button to back to normal operation.
Other ON/OFF possibilities
In addition to the ON/OFF button, the server can be switched ON and OFF in
the following ways:
– Specified switch-On time/switch-OFF time
The server is switched ON or OFF at a time specified in the ServerView
programme
– Ring indicator
The server is switched ON via an internal or external modem.
– Wakeup On LAN (WOL)
The server is switched ON by a command via the LAN.
– After power failure
The server automatically switches ON following a power failure (depending
of the settings in the BIOS).
– IPMI
The server is switched ON by an IPMI console via COM1 or RJ45.
A26361-K875-Z102-3-7619
Switching the Server ON/OFF
47
Advertisement
Table of Contents
