Fujitsu PRIMERGY RX100 Operating Manual page 22

Notes on Safety
Modules with Electrostatic Sensitive Devices:
Electrostatic-sensitive components may be identified by the following sticker:
Figure 1: ESD label
When you handle components fitted with ESDs, you must observe the following
points under all circumstances:
You must always discharge static build up (e.g. by touching a grounded
object) before working.
The equipment and tools you use must be free of static charge.
Remove the power plug from the power socket before inserting or removing
components containing ESDs.
Always hold components with ESDs by their edges.
Do not touch any exposed pins or conductors on a component.
Use a grounding cable designed for this purpose to connect yourself to the
system unit as you install components.
Place all components on a static-safe base.
I
You will find a detailed description for handling ESD components in the
relevant European or international standards (EN 61340-5-1,
ANSI/ESD S20.20).
16
Important Notes
A26361-K875-Z102-3-7619