Fujitsu PRIMERGY RX100 Operating Manual page 30

Installing/Removing the Server into the Rack
The main features of the rack systems of the Fujitsu Siemens Computers GmbH
are:
PRIMECENTER Rack
– Frontally bolted telescopic rails or sliding rails.
The rails are provided with a linear alignment to ensure an adjustment to
different rack depths.
– Extended cable management within the lateral rack area.
DataCenter Rack
– Frontally bolted telescopic rails or sliding rails (except within the rear left area
where a support bracket is used).
– Extended cable management within the lateral rack area.
19-Inch (Classic) Rack
– Directly laterally bolted telescopic rails or sliding rails.
– Cable management by using an articulated cable carrier.
The mounting of the corresponding rails in the different racks is described in the
next sections.
The mounting of the cable management is described in detail in the Technical
Manual to the respective rack.
24
Hardware Installation
A26361-K875-Z102-3-7619