Setting The Day And Time - Philips TD6611/BB051P User Manual

2
Press
RECORDING
3
Speak clearly close to the microphone of the handset.
You have up to 2 minutes to talk.
4
Once your message is finished, press
A beep indicates the end of the recording.
To hear your outgoing message, press
5
Press
Note:
To change your outgoing message, simply record over the previous one by
proceeding as described above.
Once you have recorded your own outgoing message, the pre-recorded one is
deleted.

Setting the day and time

You need to enter the day and time so that your answering machine can time stamp
the messages you receive. When you enter answering machine mode or when
you listen to your messages, the day and time are displayed.
In the event of a power failure, this operation should be repeated.
Default setting: MON 00:00.
1
Press
DAY TIME
2
Press
3
Press
4
Press
5
Press
6
Press
14
K v
, then .
is displayed.
r
to exit answering machine mode.
R -
, press until you reach
is displayed.
o
.
- +
or to select a day of the week, then press
- +
or to select the hour, then press
- +
or to select the minutes, then press
R
to exit menu mode.
Your Onis Answering machine
s
to stop recording.
v
.
ANSW SETUP
, then press
o
to confirm.
o
to confirm.
o
.
o
to confirm.