Handset Charge; Handset Discharge; Testing Your Telephone - Philips TD6611/BB051P User Manual

Handset charge

Before you use your telephone for the first time, charge the handset for at
least 16 hours. This precaution helps to lengthen the life of the batteries.
To charge your handset, place it on the base station. The
on the display to indicate that the handset is charging.
When the
The base station must be connected to a power supply using the power cable
supplied with your phone.
- To ensure an optimum handset charge, replace the handset on the
base station regularly.
- The keypad can face upwards or downwards. However, the ringing
tone is louder when the keypad faces downwards.

Handset discharge

Shortly before the handset is totally discharged, the
handset display. If you are in the middle of a call, you will also hear a warning beep.
The handset will switch itself off shortly afterwards. You will need to recharge the
handset before you can use it again.

Testing your telephone

Now that your telephone is installed, try making a call.
•
Press
the dial tone.
•
Dial the number. The digits you dial appear on the display and the dial tone
should stop.
If you have problems making your test call, make sure that the telephone cord is
correctly plugged into the telephone network socket and into the base station
socket, that the base station is plugged into a power outlet, and that the base
station light is on.
If your base station is correctly connected but the dial tone does not stop when you
dial the number, you need to change the dial mode. To do this refer to "Setting the
dial mode" on page 23.
b
symbol disappears, your handset is fully charged.
t
on the handset. The
Installing your Onis
Tips
b
t
symbol appears on the display and you hear
b
symbol will appear
symbol appears on the
7