Switching On The Answering Machine By Remote Control; Calling Into Your Answering Machine By Remote Control - Philips TD6611/BB051P User Manual

Switching on the answering machine by remote control

Before you can call into your answering machine by remote control, you need to
enter a remote control code (see "Entering a remote control code" on page 19).
1
Dial your telephone number. Let it ring 9 times.
The answering machine will start up and send back a waiting tone.
2
Press
3
Press 7 on the telephone keypad and hang up.
Your answering machine is once again ready to handle calls.

Calling into your answering machine by remote control

You can call into your answering machine from any telephone by calling your own
telephone number.
If your answering machine does not answer, the memory is full or the answering
machine is not switched on.
1
Dial your telephone number then, during the outgoing message, press
key
2
Enter your 4 digit code.
If the code is correct, your answering machine will play back any messages
automatically.
If the code is wrong, the outgoing message will be repeated. Press * key
again and enter your code. The answering machine will hang up after 3
unsuccessful attempts.
3
During the call you can enter remote control codes, e.g. 1 to repeat the
current message, 3 to listen to the next message, and so on (see your
Remote Control Memo card for details).
Your Onis handset allows you to enter all available remote control functions
(except "Erase all messages"). The symbols printed on the keys indicate their
remote control function, e.g.
4
Hang up to end the call.
The answering machine will return to the mode it was in before your call
unless you press 9 to switch off the answering machine. If it was on, it stays
on and is ready to handle calls.
22
*
on the telephone and enter your remote control code.
*
on the telephone.
Your Onis Answering machine
>
(key 3) to listen to the next message.