Answer A Call; Adjust The Speaker Volume; Turn The Speaker On Or Off; Transfer A Call - Philips CRD150 User Manual

Answer a call

When the phone rings, you can select from the
following options to answer the call:
• pick up the handset;
• press .
Note
•
If you have subscribed for a caller ID service with
the service provider, you will see the caller number
displayed on the screen.

Adjust the speaker volume

Press in standby mode to select the low or
high volume.

Turn the speaker on or off

Press .

Transfer a call

Note
•
This service is network dependent. Check with the
service provider for additional charges.
1
Make a first call.
2
Press during a call.
3
Make a second call.
4
Hang up the handset when the other side
answers the call.
» The first call is transferred to the
second call.

6 Settings

Set the contrast of the screen

You can set the contrast of the phone screen to
5 different levels.
1
Press FLASH/
in standby mode.
2
Pick up the handset to confirm the setting.

Temporary time setting

Note
•
You can ignore
country dependent codes.
1
Press SETTING to enter the setting mode.
2
Press / to select
3
Press SETTING again to enter the
temporary time setting menu.
» is displayed.
4
Press / to set the time.
5
Pick up the handset to confirm the setting.
and which are
.
EN 7