Managing A Conference Call; Locking The Handset Keypad - Philips TD6816/BB051P User Manual

3
Once the other handset answers, you can either:
- Transfer the call by pressing
- Switch back and forth between the other handset and
If the other handset does not reply, you can return to your
outside call by pressing
outside and inside call by pressing

Managing a conference call

A conference call involves 3 persons in a common call.
1
While an outside call is in progress, press
another handset.
The outside call is put on hold.
2
Dial the number of the handset with which you want to
initiate a conference call, or press
handsets.
The handset(s) called start(s) ringing.
3
Once the other handset answers, you can either :
- initiate the conference call by pressing
- switch back and forth between the other handset and
If the other handset does not reply, you can return to your
outside call by pressing e, or you can hang up by
pressing t .

Locking the handset keypad

To prevent unwanted key presses, you may want to lock the
handset keypad. For example while you have the handset in
your pocket.
1
Press the
The handset beeps to confirm the new setting and
is displayed on the handset.
If a key is pressed, while the keypad is locked, a help
message will be displayed for 2 seconds, unless the handset
is set in off mode.
2
To unlock the handset keypad, press again
seconds.
The handset beeps to confirm the new setting.
The handset keypad is automatically unlocked when an
incoming call is received or when you place your handset on
the base station.
16
your outside call by using
your outside call by using e.
R
key and then the
Using your extra handset
t
.
e
.
e
, or you can hang up both your
t
.
*
*
key for 2 seconds.
e
to call
to call all the
o
.
LOCKED
*
key for 2