Table of Contents
Advertisement
FP403040 REV 2.qxp_Layout 1 25/01/2019 11:48 Page 6
Before First Use
•
Carefully unpack your Table Blender as the
Blending Blades are very sharp.
•
Remove any stickers (except for the serial label
on the base of the product).
•
Carefully wash the Jug, Lid and Measuring Cup
in hot soapy water. Rinse and dry.
Using Your Total Control Table
Blender - Manual Control
Place the Plastic Jug
Base Unit (7).
Place the Lid
(2)
pushing down firmly. Place the Measuring
Cup
(1)
into place twisting clockwise to lock
into place. To avoid spillages ensure the
pouring hole in the Lid
the Spout (4).
6
(5)
onto the
on the Plastic Jug (5),
(2)
is turned away from
•
Wipe over the Base Unit with a damp cloth.
•
WARNING: Never immerse the Base Unit in
water or in any other liquid. Always ensure the
electrical connections are kept dry. This may be
wiped with a clean, damp cloth.
1
Place the food or cold liquids into the
Plastic Jug (5). Do not exceed more than the
recommended amount (see page 11).
3
Plug the Total Control Table Blender into the
mains socket & switch on (16).
2
4
Advertisement
Table of Contents
