Other Safety Considerations; Electrical Requirements; Before First Use - Morphy Richards TOTAL CONTROL Instructions Manual

• WARNING: Misuse of appliance could cause personal injury.
• WARNING: Avoid contact with moving parts.
• Extreme caution must be observed when moving an
appliance with hot contents.
• Do not use product with wet or moist hands.
• Unplug the appliance from the outlet when not in use and
before cleaning.
Treating Scalds
• Run cold water over the affected area immediately. Do not stop to
remove clothing, get medical help quickly.

Other Safety Considerations

• If the mains lead of this appliance is damaged do not use it.
Telephone Morphy Richards helpline for advice.
• The use of accessory attachments not recommended by the
manufacturer may cause damage to the unit.
• Do not place the appliance on or near heat sources such as gas
or electric stove, ovens, or burners.
• Keep the appliance and the cable away from heat, direct sunlight,
moisture, sharp edges and the like.
• When using the unit, ensure the lid is in place before switching on.
• Do not remove the lid until the Serrator Blade has stopped.
• Do not operate the appliance for making soup continuously.
• Be careful if hot liquid is poured into the Total Control Soup Maker
as it can be ejected out of the appliance due to sudden steaming.

Electrical Requirements

Check that the voltage on the rating plate of your appliance
corresponds with your house electricity supply which must be
A.C. (Alternating Current).
WARNING: THIS APPLIANCE MUST BE EARTHED.
Should the fuse in the mains plug require changing a 13 amp
BS1362 fuse must be fitted.
Features
(1) Lid Handle
(2) Control Panel
(3) Seal
(4) Lid
(5) Over Fill Sensor
(6) Motor Housing
(7) Removable Vessel
(8) Serrator Blade
(9) Vessel Release Button
(10) Jug Body
(11) Jug Handle
(12) Power Socket
(13) Smooth Function Indicator
(14) Medium Function Indicator
(15) Chunky Function Indicator
(16) Sauté Function Indicator
(17) Drinks Function Indicator
(18) Reheat Function Indicator
(19) Blend Function Indicator
(20) Pre-Clean Function Indicator
(21) LED Screen
(22) Mode Button
(23) Start/Stop Button
(24) Portion Button
(25) Keep Warm Indicator

Before First Use

It is important to clean your Total Control Soup Maker before first
use or if it has not been used for a long period of time. See the
'Dream to clean' section for more information.
When you first use your Total Control Soup Maker you may notice
some smoke/vapour emitting from the Lid, this is normal and is
simply grease that is used on some parts of the appliance applied
during the manufacturing process. After using a few times this will
stop.
How To Use Your Total Control Soup Maker
Ensure the Total Control Soup Maker is unplugged from the mains.
1
Remove the Lid (4), be careful not to touch the Serrator Blade (8).
2
WARNING: Sharp Blade.
Place all the ingredients into the Removable Vessel (7). Add the
3
liquid last, filling up to the desired portion marked on the
Removable Vessel (7). See individual recipes for more information
regarding liquid.
4 Place the Lid (4) back onto the Jug Body (10) ensuring it is
securely in place.
You may need to twist the lid/motor housing to allow the Blade (8)
to pass through the ingredients to locate the Lid (4) onto the
Jug Body (10) correctly.
5 Plug the lead into the Power Socket (12).
Press the Mode Button (22) to select the program. The Smooth
6
Function Indicator (13) will illuminate. Continue pressing Mode
Button (22) to go through the settings. Select Smooth Function
Indicator (13) for a smooth soup.
7 Select Medium Function Indicator (14) for a medium soup.
o
3