Table of Contents
Advertisement
Document revision history
Important changes to this document are listed below. Minor changes such as typographical or formatting errors are not
listed.
Date
Topic
1/23/19
Wiring devices to the AppController's
Rnet port
New look, no content changes
12/14/17
Analog outputs
2/15/17
1/16/17
Specifications
Wiring devices to the <ALCProduct>'s
Rnet port
ZS sensor overview
SPT sensor overview
Wireless sensor overview
To install the Wireless Adapter for
wireless sensors
Wiring devices to the AppController's
Rnet port
Input wiring specifications
To wire the controller to the network
Wiring for communications
Specifications
Cover
What is the AppController?
6/2/16
Specifications
2/19/16
Local access to the AppController
12/2/15
Inputs
8/14/14
Restore factory defaults
To wire the Equipment Touch to the
AppController
Specifications
Wiring devices to the Rnet port
Connecting an SPT sensor
To wire an Equipment Touch to the
AppController
BACview devices
Local Access to the AppController
* For internal use only
AppController
Installation and Start-up Guide
Change description
Removed star configuration from the first paragraph.
Added surge CAUTION to Protection specification.
Corrected impedance from 500 Ohms to 2000 Ohms
Changed name of sensors from WS to wireless
Number of SPT and ZS sensors clarified to 10 (5 per control
program)
Simplified. Detailed descriptions are available in specified
manuals. Corrected total number of ZS sensors.
New Topics
Added Wireless Adapter for wireless sensors
Added Wireless Adapter for wireless sensors
Added BACnet ARC156 connection information
Changed from Wiring the AppController to the MS/TP network
Added BACnet ARC156 connection and Wireless Adapter for
Carrier wireless sensors. Corrected SPT information.
Changed to latest controller image.
Corrected error. Max number of third party integration points
removed.
Added USB Link wiring caution.
Corrected error - changed 8 inputs to 6 inputs.
Added information on using the Factory Defaults jumper
Added Caution to maintain polarity and use the power supply
only for Carrier controllers
Maximum number of BACnet third-party integration points using
Snap - changed to unlimited, depending on memory
Power - removed references to BACview
Rnet port - added a note that number of possible ZS sensors you
can have with an Equipment Touch is 15
Added Equipment Touch and removed BACview
Local Access port - removed BACview, added Equipment Touch
Changed from "Wiring a communicating zone sensor to the
AppController"
Removed references to BACview
Removed BACview and added Equipment Touch
New topic
Removed references and topics
Removed BACview and added Equipment Touch
25
Document revision history
Code*
X-TS-TS-O
X-TS-AK-E-CC
C-AE-ZL-E-WB
C-D
C-TS-JN-BR
C-D-RD
C-D
C-D
C-D
C-D-OC
C-D-OC
C-D-OC
C-D
C-TS-RD-E
C-TS-RD-E-JH
C-TS-RR-E
C-D-LJ-E-RD
C-TS-RD-E
C-D-LJ-O
CARRIER CORPORATION ©2019
All rights reserved
Hide quick links:
Advertisement
Table of Contents
