Toyota Previa Owner's Manual page 99

There must be at least 3 seconds of blank
space between tracks in order for the APS
feature to work correctly. In addition, the
APS feature may not work well with some
spoken word, live, or classical recordings.
BAL (Balance)
This knob lets you adjust the balance be-
tween the right and left speakers.
BASS
This knob lets you adjust the bass level.
Push "BASS/TREB" so that it pops out of
its retracted position. Turn the knob to ad-
just the bass. Push the knob back into its
retracted position.
Dolby B C*
If you are listening to a tape that was re-
corded with Dolby B or C Noise Reduc-
tion, push the button marked with the
double-D symbol until the appropriate
symbol appears on the display. To turn off
Dolby, push the button until the symbol
disappears from the display.
94
The Dolby B NR mode reduces tape noise
by about 10 dB. The Dolby C NR mode re-
duces tape noise by another 10 dB, or
about 20 dB total. For best sound repro-
duction, select the same NR mode that
was used to record the tape.
*
: Dolby noise reduction manufactured under license from Dolby
Laboratories Licensing Corporation. "DOLBY" and the
double-D symbol are trademark of Dolby Laboratories Licens-
ing Corporation.
FADE
Move the "FADE" ring around "PWR/
VOL" to adjust the front/rear balance.
MTL (Metal) display
If a metal or chrome equivalent cassette
tape is put in the cassette player, the play-
er will automatically adapt to it and "MTL"
will appear on the display.
PROG (Program)
Push "PROG" to select the other side of
a cassette tape. The display indicates
which side is currently selected ( " " indi-
cates top side, " " indicates bottom side).
Auto-reverse feature—After the cassette
player reaches the end of a tape side, it
automatically reverses and begins to play
the other side. This is true whether the
cassette was playing or fast forwarding.
PWR/VOL (Power/Volume)
Push "PWR/VOL" to turn the audio sys-
tem on and off. Turn the "PWR/VOL" knob
to adjust the volume.
Pull out and then turn "PWR/VOL" to ad-
just the balance between the right and left
speakers. Move "FADE" around "PWR/
VOL" to adjust the front/rear balance.
REW/FF (Rewind/Fast forward)
Push the "FF" side of the button to fast for-
ward a cassette tape. "FF" will appear on
the display. Push the "REW" side to re-
wind a tape. "REW" will appear on the dis-
play.
To stop the tape while it is fast forwarding,
push "FF" or "TAPE"; to stop the tape
while it is rewinding, push "REW" or
"TAPE". The tape will immediately begin
to play.
If a tape side rewinds completely, the cas-
sette player will stop and then play that
same side. If a tape fast forwards com-
pletely, the cassette player will play the
other side of the tape, using the auto-re-
verse feature.