Toyota Previa Owner's Manual page 64

—Top strap anchors and
locations
If your child restraint system requires
the use of a top strap, latch the hook
onto the anchor bracket and tighten
the top strap.
See the following instructions to install the
anchor bracket.
60
All models —On the floor behind the seat
a. Using the illustration as a guide, cut
out the carpet on the floor behind the seat.
The anchor holes are plugged.
b. Remove the anchor plug you wish to
use and insert the spacer (15 mm [0.6
in.]). Tighten down the anchor bracket for
your child restraint system with a bolt.
To comply with Canada Motor Vehicle
Safety Standards, vehicles sold in Cana-
da are provided with a bracket set in the
glovebox, designed for use with any of the
3 anchor locations shown in the illustra-
tion.
If your child restraint system does not pro-
vide any of the necessary parts, ask your
Toyota dealer. (See "—Child restraint sys-
tem")
If you remove the anchor brackets when
the child restraint system is necessary no
longer, replace the seals in the holes to
prevent entry of exhaust emissions, water
or dirt.