Viessmann VITOCROSSAL 200 Installation Instructions Manual page 24

Type cm2c

Hide thumbs Also See for VITOCROSSAL 200:

Table of Contents

Fitting the thermal insulation and casing

Inserting the plugs into the control unit module and at the back of the boiler

Fig. 18

1. Insert the data cable plugs as shown in the dia-

gram. Plug 53 optional.

Fit the LAN coupling from the front with screws

2. Insert the 230 V cable plugs as shown in the dia-

gram.

X16

15A/15B

(cont.)

151

3. Guide all cables in through the base of the control

unit enclosure and apply strain relief.

Table of Contents