Nokia N80 Manual page 84

9244700_N80-1_en_zh.book Page 82 Thursday, March 23, 2006 2:34 PM
Settings
Press , and select Connect.
open the application for the first time, you are asked to
define a name for your device. After you set Bluetooth
connectivity on and change
Shown to all, your device and this name can be seen by
other users with devices using Bluetooth technology.
Select from the following:
Bluetooth—Select On or Off. To connect wirelessly to
another compatible device, first set Bluetooth
connectivity On, then establish a connection.
My phone's visibility—To allow your device to be found
by other devices with Bluetooth technology, select
to all. To hide it from other devices, select Hidden.
My phone's name—Edit the name of your device.
Remote SIM mode—To enable another device, such as a
compatible car kit enhancement, to use the SIM card in
your device to connect to the network, select On.
Remote SIM mode
To use the remote SIM mode with a compatible car kit
enhancement, set Bluetooth connectivity on, and enable
the use of the remote SIM mode with your device.
Before the mode can be activated, the two devices must
be paired and the pairing initiated from the other device.
82
When pairing, use a 16-digit passcode, and set the other
device as authorized. See "Pair devices", p. 83. Activate the
> Bluetooth. When you
remote SIM mode from the other device.
When remote SIM mode is on in your Nokia N80,
SIM is displayed in the standby mode. The connection to
My phone's visibility to
the wireless network is turned off, as indicated by
the signal strength indicator area, and you cannot use SIM
card services or features requiring cellular network
coverage. However, a wireless LAN connection remains
active during the remote SIM mode.
When the wireless device is in the remote SIM mode,
you can only use a compatible connected enhancement,
such as a car kit, to make or receive calls. Your wireless
device will not make any calls, except to the emergency
Shown
numbers programmed into your device, while in this mode.
To make calls from your device, you must first leave the
remote SIM mode. If the device has been locked, enter the
code to unlock it first.
To leave the remote SIM mode, press the power key,
and select
Security tips
When you are not using Bluetooth connectivity,
select
Do not pair with an unknown device.
Exit rem. SIM mode.
Bluetooth > Off or My phone's visibility
Remote
in
> Hidden.